Product Description Hunter Pilot Decoders Decoder installations continue to be one of the fastest growing forms of technology in irrigation control. A key advantage over conventional systems is that decoders use less wire for an overall irrigation system. That in turn means lower cost as well as quicker installation time and easier system diagnosis and repair if needed. Systems can be easily expandedwith minimal digging and disruption of landscapingby adding in more decoders rather than running additional wires. The Pilot decoder system enables you to take advantage of this cost-efficient approach. The new Pilot decoders are available in 1, 2, 4 and 6-station models, making it possible to run each head on an entire green with a single decoder. In all, decoders let you operate up to 999 stations from a single Pilot decoder hub, with reduced costs and only two wires to troubleshoot. Pilot decoders include built-in surge suppression, colour-coded wire connections, true independent station control, integrated earth grounding, programmable station addresses, two-way feedback to the controller with confirmation and status indication and internal thermal circuit breakers. PILOT-SG surge protectors are available for use with DIH golf rotors. 1 & 2-way Decoders: Height 9cm Width 4cms Depth 2.5cm Weight 150gms 4 & 6-way Decoders: Height 9cm Width 4.5cms Depth 4cm Weight 250gms Pilot -SG Surge Suppressor DIH rotor control systems require grounding with Pilot-SG surge suppressors coupled to an appropriate grounding plate or rod. Hunter recommends a minimum of one Pilot-SG for every 12 installed DIH rotors or as per project specification. Click for Hunter Pilot Cutsheet